Nissan 240sx
View
Options
History
1
2
3
4
5
6
Introduction
Details
Guide Steps
Review
Quiz
Option 2: You can also remove the entire steering column from the interior in order to install the DIF power steering bushing.
It may be difficult to re install the steering column with one person is tricky
The area where two of the bolts line up with the steering column may become tweaked or need realigning during removal and install
On the engine bay side, remove the knurled rack to column adapter as per the instructions above.
In passenger compartment, remove steering column plastic shroud by removing several philips screws visible from bottom of steering column.
Once that is out of the way, there are two 12mm bolts holding the front of the steering column up; 2, 12mm nuts toward the middle of the column, and 3 10mm nuts holding steering column to firewall
From here, you can wiggle and remove the steering column for easier access to the bushing.
« Previous
Next »
Next line
Previous line
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.