We then began to prep the new filter. We got some of the used oil (or you can use the new oil) to lubricate the new one and ensure a secure seal. Next we simply hand tightened the new filter as only 10.3 ft-lb of torques is needed to secure it on.

DO NOT over tighten the filter however as it may become deformed and ultimately leak out all over the place.

Once this was done we proceeded to adding the oil. The exact amount used for the oil change was 5.4L or 5.7 U.S. Quarts. Make sure you use a funnel as it clearly helps in keeping things clean.

Finally check your oil dip-stick and verify that the oil is at the correct level. Nailed it!