Prepping the Coilovers for Installation: The first thing to do before installing anything is to get your tools, coils, and vehicle ready. Start by removing the trunk interior before anything. This way you are clean of interior panels.

Remove the trunk liner first. It’s interesting to note that on the Subaru BRZ this super heavy duty liner is included. Well at least on the limited version we found this to be true.

Use a pick or flat-head screwdriver to pry up the retaining clips on 3 separate interior panels in the trunk. Remove the center rear panel first to make taking the side panels out easier; there were a total of 4 clips on the rear there.

Be very careful not to break any clips because the moment you pull the wrong way these clips can break off.